Introduction
Mycobacterium tuberculosis is highly pathogenic, and its infection causes tuberculosis, contributing to approximately 2 million deaths per annum.1M. tuberculosis is a highly adaptable bacterium that can persist in a non-replicating state for a long time when the environment is unfavorable. It is a successful pathogen that can modulate its host immune response to survive without adversely affecting the host immune system.2,3 Interestingly, one-third of the world’s population is believed to be infected by Mycobacterium tuberculosis.1 Cyclic adenosine monophosphate (cAMP) is a vital signaling molecule in M. tuberculosis. It also plays a crucial role in altering the host immune system at the time of infection.4,5 Intriguingly, the adaptability of the cAMP-binding domain has evolved in such a way that it can perform diverse physiological functions in response to a broad range of signals,6–8 with the best and the most studied prototype proteins of this family being c-AMP receptor protein (CRP) and fumarate and nitrate reduction regulatory protein (FNR) of E. coli, which are known to control genes in hypoxia and starvation, respectively.7
Mycobacterium tuberculosis H37Rv also has a CRP/FNR homolog, CRPMt (Rv3676) the protein is encoded by the gene rv3676.9 It is also important to note that this gene (rv3676) is present in almost all sequenced mycobacterium genomes. It has also been reported that this protein is a highly branched member of the CRP and CooA family of proteins.7,8 Protein sequence analysis revealed that CRPMt is 53% similar and 32% identical to its E. coli homolog.10
Similar to E. coli CRP, CRPMt also exists as a homo-dimmer. Structurally CRPMt carries two domains, and the cAMP-binding occurs at the N-terminal domain (residues 1–114) whereas the C-terminal domain (146–223) consists of mainly the DNA-binding helix turn helix motif. These two domains are connected by a hinge region (a helix between residues 117–144 mainly anchors these hinge regions). This helix forms the majority of the intersubunit interactions. The details of domain topology are shown in Figure S1. However, unlike E. coli CRP, CRPMt carries three additional short helices and a hairpin-like structure in the N-terminal domain (residues 54–73) that are absent in E. coli CRP.11 Detail structural investigation also reveals that the N-terminal domain of CRPMt possesses more beta-sheet structure compared to C-terminal domain. Although CRPMt is a cAMP-binding transcriptional regulator, it is interesting to note that cAMP-binding to CRPMt is associated with minimal structural rearrangements in comparison to E. coli CRP.11–13
Moreover, it has also been reported that deletion of this protein, i.e., CRPMt may lead to impaired growth in bone marrow-derived macrophages in a laboratory medium and delayed bacterial growth in a mouse model system.10,14,15 Thus, it is imperative to note that this global transcriptional factor, i.e., CRPMt might have played a significant role in the survival of this particular pathogenic bacterium, especially in macrophages. Although the physiological importance, function, and structural detail of this protein are well established, little is known about its stability and folding mechanism.
Protein folding is an essential physical process by which a nascent polypeptide chain folds into proper three-dimensional functional forms. Though this process is of the greatest importance, how it is completed (protein folding and unfolding) is only partially understood.16,17 Thus, a detailed study of the protein folding mechanism is very important.18–20 Unlike single-domain proteins, oligomeric multi-domain proteins usually fold by multiple-step processes involving the formation of one or more meta-stable intermediates. Thus, it is crucial to identify and characterize these intermediate conformations to understand the mechanism of protein folding. Equilibrium denaturation is one of the valuable methods to understand the structure, stabilization, and folding of a protein, and protein folding can be easily tracked by the characterization of its intermediates both in vitro and in vivo.21,22 Chemical denaturant such as urea or guanidinium chloride (GdnHCl) is commonly used for equilibrium unfolding of the protein and intermediate charecterization.23
In this study, we explored the structural and functional changes of CRPMt associated with the GdnHCl and urea-induced unfolding using various spectroscopic techniques such as tryptophan fluorescence spectroscopy, 8-anilino-1-napthalenesulphonate (ANS) fluorescence, and circular dichroism (CD), etc. These methods were used to study the changes in the tertiary and secondary structure of CRPMt during denaturant-induced unfolding. Size exclusion chromatography is further used to monitor the purity and oligomerization state of the protein. Furthermore, the refolding of CRPMt to its native form and restoration of activity was also explored by the withdrawal of both denaturants. Restoration of the protein structure was examined by spectroscopic and gel filtration profiles of refolded protein. The restoration of the individual domain structure was verified by partial digestion of the protein with trypsin followed by visualization of the tryptic digest fragments by running sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS−PAGE) gel (13%). DNA binding activity of the protein was also examined by Electrophoretic mobility shift assay (EMSA). These studies confirm restoring the CRPMt structure and the activity upon refolding.
We further investigated the temperature-induced unfolding of CRPMt by measuring the light scattering of the protein. We observed that the protein forms visible aggregates at higher temperatures (65°C), indicating irreversible unfolding of the protein. To understand the effect of increasing temperature on CRPMt structure, we performed extensive molecular dynamics simulations of the protein under normal conditions (25°C) and compared the dynamics at 45°C and 65°C.
We found that destabilization of the structure occurs at specific regions due to high temperatures, with unfolding starting at the terminal region first and then at the interface. Moreover, secondary structural elements, hydrogen-bonding patterns, and the interface are significantly affected at higher temperatures. Interestingly, a strong correlation was observed between our experimental results and simulations, further validating our findings. Given that CRPMt is a global transcriptional regulator, it could potentially be used as a drug target. In this proteomics era, understanding the structure-function relationships of target proteins is crucial for designing target-specific drugs.
Materials and methods
Materials
8-anilino-1-napthalenesulphonate (ANS) and glutaraldehyde were purchased from Sigma Chemical Company, USA. Analytical gel-filtration column (SuperdexTM 75 HR 10/30) and protein molecular weight standards were obtained from GE Healthcare Bio-Sciences AB, Sweden (formerly Amersham Biosciences). Radioactive [γ-32P] adenosine triphosphate was obtained from the Board of Radiation and Isotope Technology, India. Oligonucleotides were custom-synthesized from MWG-Biotech AG, Germany, or Sigma-Genosys, USA. All other chemicals obtained from Merck were analytical grade. All enzymes used for DNA manipulation were procured either from the United States Biochemical Corp (USA), Promega Biosciences (USA), or Roche Applied Sciences (Germany). Thrombin was purchased from Novagen® Biosciences. The expression vector used for this study was pET28a (+) (Novagen). XL1 Blue and BL21 (DE3) were used for cloning purposes. All these strains were maintained as glycerol stocks at −80°C.
Cloning, overexpression, and purification of CRPMt
CRPMt was cloned directly from the Mycobacterium tuberculosis genomic DNA using ABS1 primers (forward primer) and ABS2 (reverse primer). The sequence of primers that were used to amplify the CRPMt gene was mentioned in Table 1. The purified restriction enzyme-digested PCR product was ligated into the EcoRI and XhoI-digested pET28a plasmid, which was used to transform competent E. coli XL1B cells. Plasmid DNA from selected clones with an N-terminal hexa-histidine tag was isolated and transformed into E. coli BL21 cells for protein expression. Expression of CRPMt was induced by the addition of 0.5 mM isopropyl β-D-thiogalactopyranoside (IPTG) to an E. coli BL21 cell culture when the cell culture OD595 reached 0.5 after the addition of IPTG cells were grown further for 3 h at 37°C. Finally, cells were harvested and suspended in sonication buffer [20 mM sodium phosphate buffer pH-7, 500 mM NaCl, and 10% glycerol] and then subjected to sonication and centrifugation. After sonication, the pellet was discarded, and the supernatant was collected and loaded into a pre-equilibrated nickel agarose resin (Qiagen), which had been equilibrated in sonication buffer and washed sequentially with wash buffers containing 10 and 50 mM of imidazole. The protein was finally eluted in 500 mM imidazole-containing buffer, and the purity of the protein was checked by nanodrop and running the protein on a 12.5% SDS-PAGE (Figure S2). Figure S2 shows the purification profile of the 6x His-CRPMt protein. Imidazole was dialyzed with dialysis buffer [20 mM Tris-Cl (pH-7.5), 150 mM NaCl, 5 % Glycerol, and 1 mM EDTA].
Table 1Cm values from different unfolding assays
Protein | Assay Type | Denaturant | Cm (M) |
---|
CRPMt | far-UV CD | Urea | 4.49 ± 0.02 |
CRPMt | Trp-fluorescence | Urea | 4.10 ± 0.02 |
CRPMt | far-UV CD | GdnHCl | 1.94 ± 0.02 |
CRPMt | Trp-fluorescence | GdnHCl | 1.29 ± 0.01 |
Size-exclusion chromatography
Size-exclusion Chromatography experiments were performed in an ÄKTA™ FPLC system (Amersham Biosciences, Sweden) connected to a Superdex®75 HR or Superdex®200 HR column using the protocol developed by Datta et al.24 At a time of purification, 250–500 µg of the protein (recombinant CRPMt or a standard marker protein) was applied to the column. Before loading the protein, the column was pre-equilibrated with buffer A [20 mM Tris-Cl (pH 7.5), 150 mM NaCl, 5% Glycerol, and 1 mM EDTA]. All experiments were performed in buffer A unless stated otherwise. A fixed flow rate of 0.5 mL/min was maintained throughout the process. The Rf (Retardation Factor) value was calculated according to the following equation,
Rf=Ve−V0Vt−V0
in the equation, Ve = Elution volume; V0 = Void volume, and Vt = Total volume of the column.To understand the underlying mechanism involved in the folding process of this protein in the presence of chaotropic agents, the protein was first denatured at different concentrations of urea or GdnHCl overnight at 4 °C and then applied to the column. The gel filtration column was equilibrated with the respective denaturant-containing buffer solutions before loading the proteins.
Circular dichroism (CD) spectroscopy
Circular Dichroism (CD) measurements were also carried out using the protocol developed by Datta et al.24 Briefly, CD spectroscopy was performed at room temperature using a JASCO J600 spectropolarimeter equipped with a temperature controller. Far-ultra violet (Far-UV) CD (260–200 nm) was recorded using a cuvette of 1 mm path length and 10 µM protein solution for each measurement. To study the effects of denaturants on the secondary structures of proteins, far-UV CD spectra (215–260 nm) of urea and GdnHCl-treated samples were recorded individually. The sample was prepared by incubating the protein with an increasing concentration of urea/GdnHCl for 18 h at 4°C. Protein concentrations were kept at 10 µM for all far-UV CD measurements, and experiments were performed in triplicate. Each measurement was a signal average of five spectral scans to maximize the signal-to-noise ratio. The buffer contributions were also subtracted from the corresponding spectra of protein samples. The CD results were finally expressed regarding mean residual ellipticity.
Tryptophan fluorescence spectroscopy
Fluorescence spectroscopy was used to study the unfolding/refolding behavior of CRPMT induced by chaotropic agents (urea and GdnHCl). All measurements were carried out using a Hitachi F3000 spectrofluorometer with 10 µM protein. Fluorescence was measured by tryptophan excitation at 295 nm and emission at 310–400 nm with excitation and emission bandpass of 5 nm.22 The equilibrium unfolding experiments were performed after incubating the protein with an increasing concentration of urea/GdnHCl for 18 h at 4°C. Finally, the unfolding of CRPMT was measured by observing the changes of fluorescence λmax as a function of urea/GdnHCl concentration. 8-Anilinonaphthalene-1-sulfonic acid (ANS), a highly hydrophobic fluorescence dye, is generally used to track the hydrophobic exposure of protein during the unfolding/folding process.22 For ANS fluorescence measurement, the excitation wavelength was set at 340 nm, and the emission spectra were recorded at 440–600 nm range. The experiments were carried out in triplicate at room temperature. For almost all experiments, fluorescence intensities were determined at the λmax after inner filter correction.25 The inner filter effect is a prevalent problem in fluorescence measurement studies. The primary reason for the inner filter effect is the absorption of light by any fluorophore (protein).26
Analysis of unfolding curves
Assuming that the unfolding of CRPMt follows a two-state unfolding, the fraction of unfolded protein molecules (fu) was calculated from the following equation27:
fu=Xn−XXn−Xu
where X, Xn, and Xu represent the observed spectroscopic signal at any particular denaturant concentration, the spectroscopic signal in the completely folded state, and the spectroscopic signal in the completely denatured state, respectively. The Cm (denaturant concentration at the midpoint of unfolding transition) value was determined by nonlinear fitting of the unfolding data to the following equation using the software as described previously.28Y=bottom+top−bottom1+10X−Cm
In the above equation, X and Y are the concentration of the unfolding agent and the fraction of unfolded protein molecules, respectively.
Acrylamide and potassium iodide (KI) quenching of tryptophan residue
Quenching of tryptophan fluorescence of CRPMt by acrylamide and potassium iodide (KI) was also monitored at room temperature using a Hitachi F3000 spectrofluorometer. For measurement, 4 μM of protein solution was used, protein excitation was performed at 295 nm, and the data was recorded at the fixed emission wavelength of 340 nm in the presence of different concentrations of the quencher (acrylamide or KI) added in small volumes from a concentrated (2 M) stock solution. Band passes of 5 nm were used on both sides. The total reaction volume was set to 1 mL.
Refolding of denatured proteins
To study the refolding of CRPMt, the protein was denatured either with 7 M urea or 5 M GdnHCl. The unfolded protein was subjected to dialysis overnight against buffer A (with at least two changes in the buffer) at 4°C to completely remove all the denaturants. Refolded protein (10 µM) was used for both CD and fluorescence measurements. To confirm the complete refolding of CRPMt domains, refolded CRPMt (15 µg) along with native CRPMt (15 µg) were digested by 0.2 µg trypsin for different periods followed by the analyses of the fragments by a tris-tricine SDS-PAGE.
Thermal aggregation
The thermal aggregation of CRPMt (10 µM in buffer A) was studied to understand its aggregation rate. This was done by monitoring light scattering at 360 nm using a spectrofluorometer (Hitachi F-3000), as described by previous research.24 The wavelength and bandpass were set at 360 nm and 5 nm, respectively, for both excitation and emission. The protein solution within the cuvette chamber was heated to the desired temperature using a water-bath temperature controller (NesLab Inc.) and equilibrated for 4 min before individual readings were taken.
Construction of reporter gene plasmids
The region of the DNA sequence upstream of rpf A was generated using polymerase chain reaction (PCR) from M. tuberculosis H37Rv genomic DNA using the primer pairs (Table S1). The PCR product (200-bp) was then cloned into a pBluescript vector at the Eco RV site to obtain the plasmid pABS 04.
Preparation of DNA fragments containing pWhiB1 region of M. tuberculosis
DNA fragments used in this work were derived from the plasmid pABS 04 by PCR amplification using suitable primers (rpf A forward and reverse primer, Table S1). These fragments were further purified by running on a 1% agarose gel, cut out from the gel, and final purification was made using a Qiagen Gel Extraction Kit. The final concentration of the DNA was estimated from its absorbance at 260 nm. The PCR products containing the promoter/operator regions were end-labeled with [γ-32P] adenosine triphosphate and T4 polynucleotide kinase for 1 h at 37°C. The labeled product was then purified through a Qiagen Gel Extraction Kit.
Electrophoretic mobility shift assays (EMSA)
Radiolabeled DNA (∼5 ng) was incubated with 0–20 µM CRPMt or its mutants in the presence of 20 mM HEPES (pH 7.5), 0.2 mM EDTA, 10 mM (NH4)2SO4, 1 mM dithiothreitol, 15 mM MgCl2, 15 mM KCl and 0.05 mg/mL bovine serum albumin, for 30 minutes at 25°C. The resulting complexes were then separated on 6 % polyacrylamide gels buffered with 0.5 X TBE (45 mM Tris borate, 1 mM EDTA). Gels were typically run at 16 V/cm for 2–3 h to obtain the optimum separation and dried and autoradiographed.29
Crystal structure of CRP
The starting structure for our simulations was taken from the protein data bank [crystal structure of CRP from Mycobacterium tuberculosis; PDBID: 3H3U, chains A and B)].12 The structure had missing residues in both subunits [chain A (1, 14–17, 24–26) and in chain B (215–224)]. The missing residues were filled using the PDBSEQRES record (from the PDB header section) and Modeller (https://salilab.org/modeller/ ).30
Molecular dynamics (MD) simulation
All simulations were performed using the Gromacs molecular dynamics (MD) package,31 in explicit solvent, using the Optimized Potential for Liquid Simulations AA/L all-atom force field.32 Solvent molecules were described by the extended simple point charge model. Electrostatic interactions were implemented using Particle mesh Ewald. The temperature bath was set up with the Berendsen thermostat at 300 K for the control and at higher temperatures 318 and 338 K, the time step was set to 2 fs, and bonds involving hydrogens were constrained.33 We have used a dodecahedron box for the CRPMT system. The details of the simulations performed are listed in Table S2. Analyses of the trajectories were performed using Gromacs analysis tools, and all plots were generated using matplotlib [https://matplotlib.org/3.2.0/index.html ], figures of structures were generated using PYMOL [https://pymol.org/2/ ].
Results
GdnHCl and urea-induced unfolding of CRPMt
Far-UV CD was used to study the unfolding of CRPMt in the presence of both urea and GdnHCl. CD analysis provides essential information regarding the change in secondary structures of the protein. Among different secondary structures, the α-helix structure in the protein shows strong signals at 222 nm, and any decrease in the value of the signal is normally associated with a decrease in the helical content of the protein. CRPMt is mainly an α-helical protein (as the protein consists of ∼37% α-helices), so by extracting the θ222 values from the CD spectra of the protein (Fig. 1a and b) and plotting these values against the corresponding denaturant concentrations, one can easily get information about CRPMt folding/unfolding behavior. According to our data, CRPMt shows monophasic unfolding curves in the presence of both denaturants (Fig. 1a and b). The unfolding CRPMt in the presence of GdnHCl starts around 1 M and completes at 4 M; in the case of urea, CRPMt unfolds at 3.5 M, and denaturation completes at 6 M. The unfolding behavior of CRPMt follows the general trend of any globular protein. We have found that CRPMt is denatured early in the presence of GdnHCL (GdnHCL is always considered a much stronger denaturing agent than urea).34 The intrinsic tryptophan fluorescence intensity values were collected from (Fig. 1c and d) and plotted against the increasing GdnHCl/urea concentrations. In the case of Trp fluorescence, the curves were also roughly monophasic, and the unfolding profile of the protein was very similar to what we observed before with CD spectroscopy. So, it can be suggested that the unfolding of CRPMt in the presence of denaturant (GdnHCl and urea) follows a two-state model without any detectable intermediate. The calculated Cm (denaturant concentration at the midpoint of unfolding transition) values from different experiments were provided in Table 1. We have also studied CRP unfolding in the presence of c-AMP by fluorescence and CD spectroscopy as CRP is switching its function by binding with cyclic-AMP. Protein unfolding was induced by either urea or GdnHCl. Our data reveals that c-AMP stability and unfolding of CRPMt remain unaltered compared to the wild-type protein (Fig. S3). Our data further suggests that c-AMP binding is not causing any significant change in the CRPMt structure or global conformation change of the protein.
Quenching of tryptophan fluorescence
The tryptophan fluorescence of proteins decreases in the presence of molecules like acrylamide or potassium iodide (KI), and they are known as quenchers. The quenching phenomenon can also be used to probe the accessibility of tryptophan residues in a protein. CRPMt has two tryptophan residues, viz. trp112 and trp 203. Tryptophan fluorescence quenching of CRPMt was studied in the presence of acrylamide and KI. The quenching data was analyzed by Lehrer plots using the following equation.35
F0ΔF=1Fa(1Ksv[Q]+1)
In the equation, F and F0 represent the fluorescence in the presence and absence of quencher, and ΔF = (F0 − F); Fa is the fraction of accessible tryptophan residues, [Q] denotes the concentration of quencher and Ksv is the constant (also known as stern-Volmer constant) representing accessible fluorophores. From the plot of F0/ΔF versus 1/[Q], the values of Fa (inverse of y-intercept) and Ksv (inverse of slope) can be determined. The Lehrer plots for quenching of CRPMt by acrylamide and KI are shown in Figure 2.35 The details of parameters obtained from fittings are provided in Table 2. A value of about 0.86 was obtained for Fa for acrylamide quenching, indicating that both the tryptophan residues were accessible to acrylamide, with a Stern-Volmer constant of 7.31 M−1. For KI, the accessibility of the tryptophan residues was only 59%. Acrylamide is a neutral quenching agent that can easily diffuse through protein structure and quench all available tryptophan residues present in CRPMt, including deeply buried tryptophan residues (trp112 and trp203). On the contrary, iodide is negatively charged and generally remains a highly hydrated molecule. As an outcome, its diffusion is minimal and only quenches tryptophan residues present at the protein surface. From quenching properties of KI and acrylamide, one can get an idea about the conformation state of the protein, and according to our analysis, in the absence of a denaturant, CRPMt almost exclusively existed in folded conformation. Although we have seen differences in quenching between acrylamide and KI, the Ksv values were low in both cases. We believe this phenomenon is attributed to the highly folded nature of CRPMt and tryptophan residues inside the core of the protein (our computational data also support this result). Due to the rigidity of the protein, acrylamide cannot penetrate deep inside CRPMt and efficiently bind tryptophan; as an outcome, low binding was observed. We have also seen increasing Ksv value of both acrylamide and KI in the presence of GdnHCl and urea (data not shown), further supporting our hypothesis.
Table 2Fluorescence quenching data by acrylamide and KI
Quencher | y-intercept | Fa | Ksv (M−1) |
---|
Acrylamide | 1.16 | 0.86 | 7.31 |
KI | 1.67 | 0.59 | 7.89 |
ANS fluorescence
In the unfolding of CRPMt induced by urea and GdnHCl, the unfolding curves derived from CD and fluorescence studies did not fully align, suggesting the potential existence of an intermediate state. An ANS binding study was performed to determine whether an intermediate state of CRPMt is present during unfolding. ANS tends to bind to the hydrophobic patches of a protein that become exposed during unfolding. Typically, in the molten globule state, the hydrophobic patches of a protein are highly exposed compared to its native conformation, and ANS binds to these exposed hydrophobic patches. The binding of ANS to hydrophobic patches is directly associated with increased fluorescence intensity at approximately 490 nm. However, in our experiments with CRPMt, fluorescence intensity decreased with increasing concentrations of chemical denaturant (Fig. 3), indicating a lack of significantly exposed hydrophobic patches. Therefore, it can be concluded that the unfolding of CRPMt follows a two-state model without any notable intermediate.
Size-exclusion chromatography (SEC) of CRPMt with GdnHCl and urea
To get a complete understanding of the effect of GdnHCl and urea on the oligomerization of CRPMt, we have analyzed 0−5 M urea-equilibrated and 0−3 M GdnHCl-equilibrated CRPMt samples through SEC. Both the native and denaturant treated (Fig. 4a and b) sample shows a single peak with almost identical retention volume. According to the SEC profile, the native protein was eluted at 57.06 mL. While in the presence of varied GdnHCl concentrations (0.5, 1, 2, 2.5, and 3 M), the elution peaks were gradually shifted towards lower values (55.87, 54.01, 51.87, 49.94, and 48.96 mL) with increasing absorbance indicating subunit dissociation and unfolding. In the presence of varied urea concentrations (2, 3, 3.5, 4, and 5 M urea), the CRPMt elution profile almost follows a similar trend as of GdnHCl. Proteins were eluted at 53.43, 52.12, 51.33, 50.62, and 49.5 mL, respectively (Table 3).
Table 3Elution Volumes of CRPMt at different concentrations of urea and GdnHCl
GdnHCl (M) | Elution volume (mL) | Urea (M) | Elution volume (mL) |
---|
0 | 57.06 | 0 | 57.06 |
0.5 | 55.87 | 2.0 | 53.43 |
1.0 | 54.01 | 3.0 | 52.12 |
2.0 | 51.87 | 3.5 | 51.33 |
2.5 | 49.94 | 4.0 | 50.62 |
3.0 | 48.96 | 5.0 | 49.5 |
Reversible unfolding of CRPMt
We were also interested in studying the reversibility of GdnHCl and urea-induced denaturation of CRPMt. We speculated that if equilibrium unfolding is reversible, CRPMt will return to its original (native) state once the denaturant is removed from the unfolding buffer. To check our hypothesis, Trp fluorescence, CD spectra and gel filtration profiles of native, likely refolded, and unfolded CRPMt were recorded (Fig. 5). All our experimental data including Trp fluorescence spectra (Fig. 5a and b), far-UV CD spectra (Fig. 5c and d) and gel filtration profiles (Fig. 5e and f) suggest restoration of its structure, once denaturant is withdrawn.
To further verify the restoration of CRPMt individual domain structures, both native CRPMt and refolded CRPMt were subjected to partial trypsin digestion followed by the visualization of the digested fragments by running samples at 13.5% SDS-PAGE. The result clearly shows that the molecular masses of all digested fragments from the refolded proteins (either generated from 5 M GdnHCl or 7 M urea) were almost similar to those prepared from the digestion of the native protein, clearly indicating genuine refolding of individual domain structure (Fig. S4).
Our previous experiments confirm the structural restoration of protein by the withdrawal of denaturant stress. In the next step, activity restoration of refolded protein was also studied by measuring the DNA binding activity of refolded CRPMt. EMSA was employed to study DNA binding activity. As evident from Figure S5, refolded CRPMt, prepared either from 7 M urea or 5 M GdnHCl- shows good binding to its native promoter region of DNA. The activity of refolded CRPMt was very similar to that of native CRPMt (Fig. S5). This clearly shows regeneration of the structure (domains), function, and DNA binding activity upon refolding, emphasizing the reversible nature of CRPMt unfolding induced by urea or GdnHCl.
Temperature-induced aggregation of CRPMt
It has been observed that CRPMt undergoes irreversible aggregation upon heating. This aggregation leads to the formation of visible precipitation, and the process can be monitored by measuring the light scattering at 360 nm. According to our data, native CRPMt is stable at room temperature, undergoes irreversible unfolding with increasing temperature, and forms aggregate above 60°C temperature. For CRPMt, irreversible thermal unfolding starts at 52°C and completes at 65°C along with visible precipitation (Fig. 6).
Discussion
MD simulation of CRPMT
To understand the destabilization mechanisms brought upon by temperature, we have performed extensive simulations (50 ns, three replicates or independent simulations at each condition, a total of 150 ns of simulation, Table S2). We started our simulation at room temperature (25°C, normal condition), which provided us insight into the stability of CRPMt without any external perturbation factors (e.g., higher temperature or chemical denaturing agents). Figure 7a shows the overall structural deviation of the protein through a change in root mean square deviations (RMSD). The protein at 25°C (control) and 45°C shows similar characteristics in terms of overall structural change, although the RMSD was higher at 45°C. CRPMt structure at 65°C undergoes a large structural alteration. To look at which specific regions were affected by higher temperature, we analyzed root mean square fluctuations averaged over the period for chain A (Fig. 7b). Ignoring the terminal regions (since most proteins are largely flexible at the terminal), we observed peaks of higher fluctuations around residues 50, 100 and 150 in chain A for the control (CRPMt at 25°C) as well as for higher temperatures (45 and 65°C). The changes were almost identical in chains A and B under the same simulation conditions. The protein remains stable when simulated at 25°C (control) and 45°C. Snapshots from the simulation can be seen in supporting data, Figure 8 and S4. In the next section, the unfolding and destabilization of the protein brought about by increasing the temperature to 65°C is discussed in more detail.
Unfolding study of CRPMT by MD
The unfolding and destabilization of CRPMt were simulated starting from the crystal structure filled in missing regions (see Methods) at 65°C. Figure 7 displays the global (RMSD) and local (RMSF) structural distortion over time. Figure 8 shows the change in secondary structure composition (in terms of percentage of helices and beta-strands, which also points to the unraveling of the overall structure at higher temperatures. Figure 9 displays the local unfolding and destabilizing at higher temperatures at different snapshots during the simulation. At 65°C, the structure collapses within 10 ns of the simulation. Notably, the interface region is distorted, but since the structure collapses, it forms a more artificially compact structure (the buried surface area increased from 1,339 to 1,845 Å2, Figure S6). Notably, the secondary structures were not equally affected by higher temperatures, and the alpha-helices degraded faster than the beta-sheets (helicity reduces from 37 to 33%, and strand composition reduces from 25 to 22% at 65°C). Changes in secondary structural composition over time can be seen in Figure 9, which points to distortion of secondary structural elements due to the effect of higher temperature. Hydrogen bonding patterns were also affected; the contacts prevalent in the control (Table S3) were not found at higher temperatures (the pairs not highlighted as bold are only present at the specific condition).
Overall distortions of the protein were only pronounced at higher temperatures; all the parameters reflect the same trend (Fig. 7). Larger fluctuations were also observed for CRPMt at 65°C. The interface of the native protein has two helices crossed over each other (see first structure in Fig. 8); this interaction was gradually lost at 65°C, and this phenomenon was also visible in the change in the buried surface of the complex over time (Fig. S7).
Supporting information
Supplementary material for this article is available at https://doi.org/10.14218/GE.2023.00043 .
Figure S1
Domain and topology of Cyclic AMP Receptor Protein (CRP) of Mycobacterium tuberculosis. Cyclic AMP Receptor Protein (CRP) carries N and C-terminal domains. The two domains are connected by a linker, the detail topology of each domain is also shown in the figure.
(DOCX)
Figure S2
Purification of 6x His Tagged CRPMt. The protein was purified using a Ni-agarose column, and the purity of the protein was verified using SDS-PAGE. In the gel Lane 1, sup; Lane 2, pellet; Lanes 3–4, wash; Lanes 5-8, elution fractions, Lane 9, molecular weight marker.
(DOCX)
Figure S3
Urea and GdnHCl mediated equilibrium unfolding of CRPMt in presence of c-AMP measured by fluorescence and circular dichroism. For fluorescence experiments, intrinsic Trp fluorescence intensity values (Flu) at 334 nm were determined from the fluorescence spectra, normalized (as above), and plotted against increasing urea (top) and GdnHCl (bottom) concentration. From the images, it was evident that the protein was more resistant towards urea compared to GdnHCl. For CD, The θ222 (ellipticity at 222 nm) values, derived from the recorded far-UV CD spectra of a CRPMt in the presence of urea (top), and GdnHCl (bottom) were normalized with respect to that of the same protein in the absence of any chemical denaturant. The plots of normalized θ222 values vs. urea and GdnHCl concentrations indicate the alternation of secondary structure (particularly α-helix) of the protein samples at increasing urea and GdnHCl concentrations.
(DOCX)
Figure S4
Refolding of (a) GdnHCl-denatured and (b) urea-denatured CRPMt. SDS−PAGE gel analysis of the peptide fragments generated from the digestion of native as well as refolded CRPMt with trypsin.
(DOCX)
Figure S5
Folding of denatured CRPMT based on activity studies. Electrophoretic Mobility Shift Assay (EMSA) of refolded CRPMt, after denaturation induced by (a) GdnHCl and (b) urea.
(DOCX)
Figure S6
Snapshots of CRPMt at 25 °C. The two chains are shown in green and cyan cartoons. The starting structure is taken from the control simulation, showing the changes in the overall structures during the simulation. The radius of gyration (Rg) in Å is provided along with the time stamp.
(DOCX)
Figure S7
Change in buried surface area (BSA) over simulation time for CRPMt at normal conditions or control (at 25 °C) versus higher temperature. BSA increases from 1,325 (at the starting point) to 1578 Å2 (end of simulation) for the protein dimer at native conditions (control at 25 °C in water). BSA increases from 1,298 to 1,552 Å2 for the protein dimer at 45 °C and 1,339 to 1,845 Å2 at 65 °C.
(DOCX)
Table S1
List of primers used in this study.
(DOCX)
Table S2
Summary of simulations performed (three independent replicates).
(DOCX)
Table S3
Hydrogen bonding partners prevalent during the simulation (common pairs are highlighted in bold).
(DOCX)